Description

White putty for repairing holes and small cracks on interior and exterior surfaces of concrete, wood, stucco, brick, and drywall. Dries quickly, leaving a waterproof finish that is easy to clean with water.

Available in: ¼ US GAL, 1 US GAL, 5 US GAL

Also, learn about our construction adhesives.

Application

The surface must be clean, dry, and free of contaminants such as grease, oil, wax, chalk, loose paint, and dirt.

Apply Crossco Joint Compound with a spatula. One layer for small holes.

For larger holes, use two or more layers of Crossco Joint Compound, allowing 2 hours of drying time between coats.

Let it dry for 2 hours, and once dry, rinse the excess sand from the surface and let it dry again.

When fully dry, you can paint with latex or oil-based paint.

Do not apply outdoors if rain is forecasted.

To clean tools, use warm water with soap immediately.

Do not use putty or sealant where there is excessive expansion and contraction of the surface.

Advantages

• Fungus resistant
• Ready to use
• Resistant to extreme weather conditions
• Suitable for interior and exterior use
• Easy to clean

Specifications

• Appearance: White
• Odor: Characteristic
• pH: 8-9
• Viscosity: 400,000-500,000 cps
• Coverage: 175 sq. ft.² per gallon
• Drying Time: 2 hours between coats

Warnings

KEEP OUT OF REACH OF CHILDREN

For chemical emergencies only, call Chemtrec
1-800-424-9300.

The manufacturer’s liability in connection with the sale of this product extends only to the replacement price.